Messages

1

Technical / Re: When lock tight wont work, what will?

« on: February 07, 2012, 02:31:37 AM »

Had same problem, with rm85/105. The holes on the hub were wallowed out. Replaced hub, problem solved.
good luck!

2

Technical / Re: Yz250 2011 problems

« on: January 04, 2012, 02:53:50 AM »

All stock except pro circuit pipe on race bike, fmf pipe on practice bike.
Also met a guy at south of border training facility who just had same problem with same bike and he switched to race fuel mixture and all is good.
Thanks, Good Luck

3

Technical / Re: Yz250 2011 problems

« on: January 02, 2012, 10:43:38 AM »

  went south with rider for the past week. Mixed 3 gallons race gas with 2 gallons 93 pump gas 32:1 bell ray h1r. He rode alot, lol, burned 20 gallons through practice bike. Problem solved. Stock yz250 will not last on pump gas if ridden aggressive.  Met another guy who had same problem and fixed same way.
bike is awesome, just run min 100 octane fuel.
thanks for replies
I hope this helps some others.

4

Technical / Re: Yz250 2011 problems

« on: December 23, 2011, 01:30:05 AM »

Hey, thanks. From what I read and hear from others, must have been fuel. Going to switch to cam2, and will update next week.
Thanks

5

Technical / Re: Yz250 2011 problems

« on: December 22, 2011, 09:48:33 AM »

Thanks checked for air leaks, also this is 3 pistons on 2 different bikes. After rebuilds we going to switch to cam2 and maxima 927.

6

Technical / Re: Yz250 2011 problems

« on: December 22, 2011, 09:35:26 AM »

OEM pistons, stock jetting. Bike properly ridden by aggressive amateur national rider with 11you years racing experience.

7

Technical / Re: Yz250 2011 problems

« on: December 22, 2011, 07:29:54 AM »

Thanks, all good, less than 8 hours on the one bike
??

8

Technical / Yz250 2011 problems

« on: December 22, 2011, 06:27:52 AM »

So here goes. Got tired of 4 stroke problems, got two 11yz250 . Use bellray h1r 32:1 with 93 octane non ethanol gas. One bike destroyed 2 pistons each within 10 hours. The other bike just broke a piston on the top, above the ring exhaust side.?
Checked fuel cans and tanks yes oil mixed. Air boots super clean, filters changed after each ride.
any info would help. We have been heavily involved in mx for 11 years and this is a first.
?
Thanks

9

For Sale / Re: THREE 2007 cr125's for sale

« on: June 22, 2011, 05:36:13 PM »

VA

10

For Sale / THREE 2007 cr125's for sale

« on: June 13, 2011, 05:46:38 PM »

1 cr125, Fully moded motor National Caliber!! Call for full details, a few include totol control crf250 suspension and many many more   $3500 FIRM! $12,000 invested, this bike needs nothing. 21 Actual hours, used as a race only bike.

1 cr125  moded Many other mods, used for district races only Very low hours approx 35, need nothing ready to race. $2900 FIRM!

1 cr125 this bike was used as a practice bike just redid top and bottom, and complete gear box, approx 80 hours. Great practice bike!  $1000. FIRM

All bikes expertly maintained, Very well taken care of.  Race bikes have aftermarket wheels/hubs.  All haveVforce reeds and either procurcuit or FMF pipes. Call 757 880-5234 For full details. PHOTOS CAN BE EMAILED OR TEXT MSG, cant get to attach here for some reason, Iam a moto guy not computer guy LOL.

NO, I WILL NOT SHIP OVERSEAS OR TAKE ANY OTHER PAYMENT THAN CASH.  SCAMMERS DONT WASTE YOUR TIME!